Front Speaker upgrade to POLK AUDIO db351(https://3.bp.blogspot.com/-YFgoKaaY5ho/VuEnlw4jm5I/AAAAAAAALAQ/9_gCNNSKX70/s200/1091_black_l.jpg)
Tools Required
- Plastic Card (Credit Card)
- Wrench
- Philips Screw Driver
- Soldering set
- Wire Cutter
Remove the Dashboard Speaker grill. You can use a Credit Card or any other plastic Card for this.
(https://4.bp.blogspot.com/-u6gvyDhPJ1U/VuEmlXaF6EI/AAAAAAAAK_8/hJfwz7Xm_2I/s1600/1.jpg)
(https://1.bp.blogspot.com/-Eg9eo8EoOWQ/VuEprLTLkkI/AAAAAAAALAs/eEwX3aywMrQ/s1600/2.jpg)
Remove the stock speakers using the screwdriver and Wrench.
(https://1.bp.blogspot.com/-BjtAT2U6MYU/VuEpjOkRlaI/AAAAAAAALAw/uBm2bhHymmI/s1600/3.jpg)
De-solder the Socket from the stock speaker.
(https://3.bp.blogspot.com/-LchUJQPqzvU/VuEoMS1JrjI/AAAAAAAALAY/Zis4uub2B_M/s1600/4.jpg)
Bass Blocker can be soldered serial (+ve) terminal of the Polk Speaker
(https://2.bp.blogspot.com/-5a85le_vmfE/VuFbwm9RKYI/AAAAAAAALBY/otJZ1Zq1BiQ/s1600/567.jpg)
Connect the Speaker wire from the car audio to the connector and fix the screws.
(https://1.bp.blogspot.com/-STPDlopdvjA/VuErb7_yiHI/AAAAAAAALBE/2RiyuyR_gtc/s1600/8.jpg)
Please go go through the Bloghttp://carspeakerupgrade.blogspot.ae/ (http://carspeakerupgrade.blogspot.ae/)
Thanks for the step by step instructions.
Hows the effect on a 1 to 5 scale considering 1 is what the stock speakers offered.
Sand,
I will give a 4
Good job Jayan. Enjoy!!
a good mod and well detailed. especially when you say the results are 4/5!!!
great going, Jayan!
Thanks Jayan, then its awesome